西西河

主题:【求助】硬盘出问题了,怎么恢复? -- 黑白

共:💬6 🌺2 新:
分页树展主题 · 全看首页 上页
/ 1
下页 末页
  • 家园 【求助】硬盘出问题了,怎么恢复?

    我的电脑上有2块硬盘,前些天从硬盘被拆下来过,昨天重新接上时,开机后显示“发现新硬件@#”,而在“我的电脑”里看不到从硬盘的2个分区了。于是进入“磁盘管理”,发现有个“磁盘1”,就对其作了个“转为动态磁盘”的操作,这时注意到这个磁盘只有几十M,意识到可能是从硬盘的数据线没接好,于是就关机重新接了一下。

    重启后,没有显示“发现新硬件”,但也没有看到那2个分区,在磁盘管理器中看到这时的“磁盘1”信息显示是正确的37.2G,但整个硬盘却是“未分区”——数据全没了!

    我用finaldata扫描,可以看到从硬盘上原来的数据,但怎么恢复呢?我现在不敢再对从硬盘做任何操作了,毕竟finaldata我没用过,就怕稍有不慎,40G的电影、图片就彻底没了

    关键词(Tags): #硬盘
    • 家园 有可能硬盘没四。

      可以重新开机,竟bios, 选另外一种硬盘mode. 几十M 的磁盘 有可能是老的硬盘mode,另外2种是lba 和??(忘了名字)这2种都是用来支持大硬盘的。不要动硬盘, 没有风险.

      It is very hard for me to input chinese.

      You can reboot, and go to bios, there are 3 mode for harddisk in some motherboard. The original one is cann't support large harddisk, i.e. more than 1024 cylinders. The small harddisk that you say before might be that one. The other two mode support large harddisk, but they are not compatible. You might be using one of the other mode. You can try switch the mode and see if you get the hard disk back.

      If you are in the right mode and lost your partition table, then 铁手's recommendation of backing up is very important to you. Any attempt to recovery could end up damage your hardware further. If you have back up your hardware right now. You think you are in a back situation right now, but you didn't realize it can be worse.

    • 家园 diskgen恢复分区表

      你这个应该是分区表错乱了

    • 家园 恢复数据到其他硬盘的话,FINALDATA对原盘只读不写,应该不会有问题
分页树展主题 · 全看首页 上页
/ 1
下页 末页


有趣有益,互惠互利;开阔视野,博采众长。
虚拟的网络,真实的人。天南地北客,相逢皆朋友

Copyright © cchere 西西河