- 发帖可能变空内容,邪门暂不知所以然
- 『稷下学宫』新认证方式,24年网站打算和努力目标
主题:【求助】老机器上装Ubuntu遇到显卡问题 -- 朝雨
我有一个2002年买的IBM Thinkpad R30,256兆内存,30G硬盘。
装了Ubuntu 9.04以后,屏幕只用了中央一块,周围留了一寸左右的黑框。System->Preferences->Display 里面显示Monitor: Unknown,分辨率最高是800x600。
R30用的显卡是Trident video accelerator CyberBlade-Ai1 AGP,网上找了半天也没找到linux版本的驱动程序。我倒是不在意分辨率,800x600够用了,问题是怎么才能让Ubuntu全屏显示呢而不必更新显卡驱动程序呢?
在网上下载了十几个xorg.conf之后,终于有一个成功的将我的显示器分辩率调到了1024x768。
[SIZE=5]
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
Boardname "Trident CyberBlade (generic)"
Busid "PCI:1:0:0"
Driver "trident"
Screen 0
Vendorname "Trident"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
Modeline "1024x768@60" 63.5 1024 1072 1176 1328 768 771 775 798 -Hsync +Vsync
Option "PreferredMode" "1024x768@60"
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@60"
EndSubSection
EndSection
[/SIZE]
最新的xorg,可以不用xorg.conf,自动检测了。非常适合老显卡。
gentoo有专门的程序测试硬件,自动产生一个合适的xorg.conf。
ubuntu的检测能力只会更强的。任何linux没有什么程序是发行版专有的
确实的,只要去做,哪个发行版都一样。
问题就在这里,每个发行版的初衷是不一样的。ubuntu走的是为微软的模式,试图一切为用户包办,因此只要有一个例外,用户就不知道去哪里找了。而gentoo是头开始就让用户一切自己定制,它是在培训用户diy的能力。
所以我玩了一段时间ubuntu就转到gentoo去了。