主题：【求助】机器的怪毛病 -- 桃李不言

Media Player。一旦出了问题，嘎巴一声，机器就撂那了。

机器不稳定也可能是硬件的问题。比如现在散热有问题，或是内存不稳定等等。我原来一台计算机总是不太稳定，后来我换了一个CPU风扇，以后就坚如磐石了。

网上的意见:

This error indicates that Windows or a kernel-mode device driver accessed paged memory at DISPATCH_LEVEL or above.

On the blue screen, the following parameters are displayed:

Memory referenced

IRQ at time of reference

0: Read

1: Write

Address which referenced memory

Cause

This error usually occurs after installation of a faulty device driver, system service or BIOS.

If you encounter this stop code whilst upgrading to a later version of Windows or when applying a service pack or hotfix, the error may be caused by a device driver, system service, anti-virus package, third-party network client or backup tool which is incompatible with the new version.

Resolution

To resolve an error caused by a faulty device driver, system service or BIOS:

Restart the computer.

Press F8 at the character-based menu that displays the operating system options.

Select the Last Known Good Configuration option.

To resolve an error caused by an incompatible device driver, system service, anti-virus package, network client or backup tool:

Check the System Log in the Event Viewer for identifying error messages.

Try disabling memory caching of the BIOS.

If available run any manufacturer-supplied hardware diagnostics, especially the memory scanner.

Make sure the latest Service Pack is installed and all applicable hotfixes have been applied.

If your system has SCSI adapters, obtain the latest manufacturer device drivers. Try disabling sync negotiation in the SCSI BIOS, check the cabling and SCSI IDs of each device and confirm proper termination.

For IDE devices, define the onboard IDE port as Primary only. Check each IDE device for proper master/slave/stand-alone setting. Try disabling all IDE devices other than the hard drives.

------------

Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL

The Stop 0xD1 message indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.

Interpreting the Message

This Stop message has four parameters:

Memory referenced.

IRQL at time of reference.

Type of access (0x00000000 = read operation, 0x00000001 = write operation).

Address that referenced memory.

Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error.