主题：【原创】不是黑屏，烦过黑屏 --- Server 2K8 -- 素里太守

1. take the replacement HDD to another computer (xp or windows 2003, or vista)

2. install the HDD as a second harddisk. assume it becomes D: drive

3. open a cmd (you must be a local admin to do the following)

4. go to d:\windows\system32\

5. run:

bcdedit /store d:\boot\bcd /set {default} device partition=c:

bcdedit /store d:\boot\bcd /set {default} osdevice partition=c:

bcdedit /store d:\boot\bcd /set {bootmgr} device partition=c:

note: this is assuming this HDD was the "c:" drive on the original machine.

6. take the HDD and install on original machine and try booting

let me know if this solves the problem

if this does not work, please at least run:

bcdedit /store d:\boot\bcd /enum all

at step5, and post the output, so I can see what the BCD store look like.

hope this helps.